Shop
Showing 73–84 of 175 results
-
-, TRANSFORMER OIL
CASTROL PERFECTO TR UN
Castrol Perfecto™ TR UN (Previously called Uninhibited Transformer Oil) is a pure mineral hydrocarbon oil, specially refined and blended from selected crudes. It is an uninhibited product, optimised for high performance to meet the stringent requirements of the International Standard IEC 60296, Edition 4.0, 2012 02.
SKU: CAS-IND-0010 -
-, BRAKE FLUID
CASTROL BRAKE FLUID DOT 4
Castrol Brake Fluid DOT 4 is a high boiling synthetic brake fluid which far exceeds the requirements of the SAE J1703, SAE J1704, FMVSS 116 DOT 4, ISO 4925 and JIS K2233 specifications.
Castrol Brake Fluid DOT 4 is designed for use in brake systems particularly those which are exposed to extreme conditions.
Application
This product has been formulated from mixed polyalkylene glycol ethers and borate esters together with other high performance additives and inhibitors which give ultimate system protection against the effects of corrosion and high temperature vapour lock.
The formulation has been developed such that the vapour lock point can be sustained at a higher level than conventional glycol ether based fluids during the service life of the product.
Castrol Brake Fluid DOT 4 is fully compatible with other fluids meeting FMVSS 116 DOT 3 and DOT 4 however, in order to maintain the superior performance characteristics of Castrol Brake Fluid DOT 4, avoid mixing with other brake fluid products.
All conventional brake fluids deteriorate during use. It is strongly recommended that Castrol Brake Fluid DOT 4 should be changed according to the vehicle manufacturers advice. In the absence of such advice, a 2 year change period is recommended.
As with all brake fluids which contain glycol ethers, care should be taken to avoid spilling this product on paintwork as it may have a damaging effect. In case of spillage rinse the affected area with water immediately. Do not wipe.
SKU: CAS-AUT-0007 -
-, COOLANT
Castrol Radicool SF Premix
Castrol Radicool SF Premix is a long-life ready to use coolant based on monoethyleneglycol with advanced organic acid inhibitor technology. In contrast to traditional antifreeze coolants, Castrol Radicool SF Premix does not contain amines, nitrites, phosphates, silicates or other inorganic inhibitors.
Castrol Radicool SF Premix provides excellent corrosion protection particularly to those engines employing light metals. It is suitable for a wide range of OEMs equipment.
Castrol Radicool SF Premix works over a wide operating temperature range for effective engine cooling in all climates, and offers freezing protection down to -37°C.
Application
The special inhibitor package used in Castrol Radicool SF Premix enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium, copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system.
Castrol Radicool SF Premix possesses a longer operational life by allowing extended drain intervals of up to 5 years. Longer drain intervals mean reduced cost and less possibility of harm to the environment.
Castrol Radicool SF Premix provides excellent protection against cavitation corrosion and effective water pump lubrication, reducing wear and noise.
The additive technology used in Castrol Radicool SF Premix prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures.
Castrol Radicool SF Premix contains a bittering agent to deter from accidental ingestion.
Download Product Data Sheet Here
SKU: CAS-AUT-0018 -
-, HEAT TRANSFER OIL
CASTROL PERFECTO HT 5
Castrol Perfecto™ HT 5 is based on a solvent-refined, high viscosity index mineral oil specially selected for its high thermal and oxidation stability.
Application
Perfecto HT 5 is primarily intended for use in closed heat transfer systems with bulk temperatures up to 300ºC. It can also be used in open systems at much lower bulk oil temperatures.
Perfecto HT 5 because of its solvency and high thermal stability serves as an excellent Turbine Flushing oil.
Advantages
-Tightly controlled specification helps minimise deposits in heat exchangers in order to maintain heat transfer efficiency
-High operating temperature capability in closed systems with temperatures up to 300oC permitted
[pdf-embedder url=”http://store.lubesghana.com/wp-content/uploads/2020/08/SPE-0145.pdf”]
SKU: CAS-IND-0009 -
-, GREASES
CASTROL SPHEEROL EP 2
Castrol Spheerol EP2 is an extreme pressure, lithium-based, general-purpose industrial grease of an NLGI No. 2 consistency.
Application
Castrol Spheerol EP2 is recommended as a general-purpose grease in all heavily loaded or shock-loaded plain and anti-friction bearings or where an extreme pressure additive is required on industrial plant and earthmoving equipment. The product is suitable for operating temperatures between -25°C to 120°C.
Advantages
-High mechanical stability – the grease keeps its consistency in service ensuring long lubricant life
-Good adhesion – continuous lubrication and reduced consumption as film stays between lubricated surfaces
-Good water resistance – the grease film remains on the surface even in the presence of water
-Resistant to copper and steel corrosion – helps prevent rust and oxidation on metal surfaces
-Excellent EP and anti-wear properties – protects equipment against extreme loading and helps minimise bearing component wear
[pdf-embedder url=”http://store.lubesghana.com/wp-content/uploads/2020/08/GRE-0013.pdf”]
SKU: CAS-IND-0011 -
-, GREASES
CASTROL CLS GREASE
Castrol CLS is a semi-fluid, extreme pressure grease developed using an optimised combination of synthetic base oil, lithium thickener technology and a specially selected additive system incorporating EP/Anti-wear additives, anti-oxidants and corrosion inhibitors.
Application
Castrol CLS is a high quality semi-fluid EP grease with excellent low temperature properties that make it particularly suitable for use in the central lubricating systems of commercial vehicles and is approved according to:
-MAN 283 Li-P 00/000
-Mercedes Benz 264.0
Castrol CLS is also considered an excellent mutipurpose semi-fluid grease for Industrial and Automotive applications generally where a combination of excellent extreme pressure performance and corrosion resistance are core requirements.
Advantages
-Good mechanical stability enables extended service operation.
-Excellent extreme pressure performance offering enhanced component protection.
-Excellent corrosion protection provides extended service in more exposed operational environments.
-Superior cold flow properties enable year-round use.
Download Product Data Sheet Here
SKU: CAS-IND-0033 -
-, TWO STROKE OUTBOARD ENGINE
Castrol Super Outboard Plus
Castrol Super Outboard Plus is a mineral based, superior performance engine oil designed for water-cooled 2-stroke outboard engines.
Application
Castrol Super Outboard Plus is suitable for use in premix and oil injection systems with both leaded and unleaded petrol for fuel/oil mixture ratios, as recommended by the engine manufacturer, up to 100:1.
Advantages
Castrol Super Outboard Plus is readily miscible with fuel and contains selected ashless additives to provide exceptional overall engine cleanliness and reduced spark plug fouling.
[pdf-embedder url=”http://store.lubesghana.com/wp-content/uploads/2020/08/ENG-0036.pdf”]
SKU: CAS-MAR-0001 -
-, NEAT CUTTING OIL
CASTROL ILOCUT 170
Castrol Ilocut™ 170 is a chlorinated, heavy metal free neat cutting oil.
Application
Ilocut 170 is mainly designed for gun drilling of ferrous and non-ferrous metalls. It can be further used for honing and general machining application.
Download Product Data Sheet Here
SKU: CAS-IND-0041 -
-, INDUSTRIAL GEAR OIL
Castrol Alpha SP 460
Castrol Alphasyn™ PG 220 gear oil is a synthetic lubricant based on polyalkyleneglycol (PAG) fluids enhanced with antioxidants, rust inhibitors and Extreme Pressure (EP) additives of high thermal stability.
Application
Alphasyn PG 220 gear oil is primarily intended for use in worm reduction gearboxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures.
This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour point makes the product suitable for use over a wide temperature range. Alphasyn PG 220 meets the requirements of most OEM’s that allow the use of PAG based gear oils.
Advantages
-Low coefficient of friction reduces energy consumption and lowers operating temperatures, this leads to longer oil life.
-Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil based products.
-Inherently high VI makes the product suitable for operations over a wide temperature range.
-High load carrying capacity and good wear protection reduces maintenance.
Download Product Data Sheet Here
SKU: CAS-IND-0025 -
-
CASTROL ALPHASYN PG 320
Castrol Alphasyn™ PG 220 gear oil is a synthetic lubricant based on polyalkyleneglycol (PAG) fluids enhanced with antioxidants, rust inhibitors and Extreme Pressure (EP) additives of high thermal stability.
Application
Alphasyn PG 220 gear oil is primarily intended for use in worm reduction gearboxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures.
This is particularly important in applications where sliding contact is high.
The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour point makes the product suitable for use over a wide temperature range. Alphasyn PG 220 meets the requirements of most OEM’s that allow the use of PAG based gear oils.
Advantages
-Low coefficient of friction reduces energy consumption and lowers operating temperatures, this leads to longer oil life.
-Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil based products.
-Inherently high VI makes the product suitable for operations over a wide temperature range.
-High load carrying capacity and good wear protection reduces maintenance.
Download Product Data Sheet Here
SKU: CAS-IND-0030